| 1 |
oget |
1.4 |
[2.1.2.0]
|
| 2 |
|
|
1. Short GI sampling improvement.
|
| 3 |
|
|
2. Support Linux Kernel 2.6.29
|
| 4 |
oget |
1.3 |
[2.1.1.0]
|
| 5 |
|
|
1. Fixed driver would send zero IWEVASSOCREQIE to Native WpaSupplicant.
|
| 6 |
|
|
2. Fixed driver would send non-zero BSSID to Navtive WpaSupplicant when STA disconnecting to AP.
|
| 7 |
oget |
1.2 |
[2.1.0.0]
|
| 8 |
|
|
1. New generation schema for multiple OS porting
|
| 9 |
|
|
2. Fixed Ad-hoc ping failed in noisy environment. (Probe Response has too many retry packet then cause "not enough space in MgmtRing")
|
| 10 |
|
|
3. Fixed WPA(2)PSK issue when group cipher of AP is WEP40 or WEP104.
|
| 11 |
|
|
4. Modified iwpriv ra0 get_site_survey:
|
| 12 |
|
|
In scan list result: Security shows "NONE" when AP is OPEN/NONE, shows "WEP" when AP is OPEN/WEP or SHARED/WEP, shows "WPAPSK(WPA2PSK)/TKIP(AES)" when AP is WPAPSK(WPA2PSK)/TKIP(AES) shows "WPA(WPA2)/TKIP(AES)" when AP is WPA(WPA2)/TKIP(AES)
|
| 13 |
|
|
5. Support kthread.
|
| 14 |
|
|
6. Add New A band channel list region 15 contains the whole channels in the A band region 4 and the new CE channel 167,169,171,173
|
| 15 |
|
|
7. Add New IEEE802.11r functionality.
|
| 16 |
|
|
8. Fixed WPA2-Enterprise failed when AP reboot or turn off then turn on.
|
| 17 |
|
|
9. Fixed STA cannot connect to 11B only AP when the setting of is PHY_11GN.
|
| 18 |
oget |
1.1 |
[1.8.0.0]
|
| 19 |
|
|
1. Fixed compile error when CARRIER_DETECTION_SUPPORT is enabled.
|
| 20 |
|
|
2. Add "iwpriv ra0 set CarrierDetect=0(or 1)"
|
| 21 |
oget |
1.2 |
3. Add Ad-Hoc to support N rate.
|
| 22 |
|
|
4. Fixed suspend/resume error when ra0 down, ra0 up.
|
| 23 |
|
|
5. Support Linux Kernel 2.6.27
|
| 24 |
|
|
6. Fixed DLS A-MPDU established failed.
|
| 25 |
oget |
1.1 |
|
| 26 |
|
|
[1.7.0.0]
|
| 27 |
|
|
1. Support SIOCSIWGENIE, SIOCGIWGENIE, SIOCSIWMLME, SIOCGIWENCODEEXT, and SIOCSIWPMKSA.
|
| 28 |
|
|
2. Support IWEVGENIE in iwlist ra0 scan.
|
| 29 |
|
|
3. Support DLS
|
| 30 |
|
|
4. Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP.
|
| 31 |
|
|
5. Fixed length error of RSN/SSN IE for WpaSupplicant.
|
| 32 |
|
|
6. Fixed WPAPSK rekey problem when A-MSDU is enabled.
|
| 33 |
|
|
7. Fixed NetworkManager cannot detect ra0 when ra0 is not up.
|
| 34 |
|
|
8. Add IEEE802.11d Client Mode: None, Flexible, Strcit.
|
| 35 |
|
|
9. Add Station N only mode. (Only connects to N-AP)
|
| 36 |
|
|
10. Add Global country domain(ch1-11:active scan, ch12-14 passive scan)
|
| 37 |
|
|
11. Enhance PCIe advance power saving
|
| 38 |
|
|
12. Modified iwpriv ra0 get_site_survey: When security of AP is OPEN/WEP or SHARED/WEP, show UNKNOW/WEP in scan list.
|
| 39 |
|
|
13. When the secondary channel of AP exceeds the country region's range, station will auto fallback to 20MHz. i.e. need both control and secondary channel are both
|
| 40 |
|
|
in country region's channel list.
|
| 41 |
|
|
14. Fixed crash in LinkDown when there are >64 APs exists.
|
| 42 |
|
|
|
| 43 |
|
|
[V1.6.0.0]
|
| 44 |
|
|
1. Fixed issue of Radar Channel flag building with HAS_EXT_BUILD_CHANNEL_LIST=n.
|
| 45 |
|
|
2. Fixed issue of Adhoc-STA would create in radar channel.
|
| 46 |
|
|
3. Support Linux Kernel 2.6.24
|
| 47 |
|
|
4. Support SNMP
|
| 48 |
|
|
5. Support Debug Diagnose
|
| 49 |
|
|
6. Add Makefile.NonLoadableModule for non-loadable module
|
| 50 |
|
|
7. Add two ioctl commands to change tx long/short retry limit.
|
| 51 |
|
|
|
| 52 |
|
|
[V1.5.0.0]
|
| 53 |
|
|
1. Add BaSmartHardTransmit mechanism.
|
| 54 |
|
|
2. Support Linux Kernel 2.6 suspend and resume.
|
| 55 |
|
|
3. Support extened channel list.
|
| 56 |
|
|
4. Add "iwconfig rate" setting for legacy rate.
|
| 57 |
|
|
5. Add make install/uninstall to Makfile.
|
| 58 |
|
|
6. Fixed issue of showing SNR1 information.
|
| 59 |
|
|
7. ATE: Add command "iwpriv ra0 set ATELDE2P=1" to overwrite all EEPROM contents from a .bin file.
|
| 60 |
|
|
8. Change IRQ LOCK to SEM LOCK
|
| 61 |
|
|
9. Fixed extened channel list checking issue on RT28xx.
|
| 62 |
|
|
|
| 63 |
|
|
[V1.4.0.0]]
|
| 64 |
|
|
1. Fixed "iwconfig ra0 essid"
|
| 65 |
|
|
2. Send DIS-ASSOC request to AP when ra0 down.
|
| 66 |
|
|
3. Support 5-GHz band ATE.
|
| 67 |
|
|
4. Fixed fixed rate issue in N mode and fixed rate ioctl.
|
| 68 |
|
|
5. Add Legacy Power Saving Mode.
|
| 69 |
|
|
6. Support custom wireless event.
|
| 70 |
|
|
|
| 71 |
|
|
[V1.3.0.0]
|
| 72 |
|
|
1. Support Monitor Mode with WireShark.(Usage: iwconfig ra0 mode monitor)
|
| 73 |
|
|
2. Support ATE function for EMI.
|
| 74 |
|
|
3. Support NetworkManager, wpa_supplicant by using wext.
|
| 75 |
|
|
|
| 76 |
|
|
[V1.2.0.0]
|
| 77 |
|
|
1. Add AP's wireless mode info to iwpriv ra0 get_site_survey.
|
| 78 |
|
|
2. Modify bitrate info in iwlist ra0 scan.
|
| 79 |
|
|
3. Fixed compile error in non-DBG mode.
|
| 80 |
|
|
|
| 81 |
|
|
[V1.1.0.0]
|
| 82 |
|
|
1. Fxied iwpriv security setting issue.
|
| 83 |
|
|
2. Support Big-Endian.
|
| 84 |
|
|
|
| 85 |
|
|
[V1.0.0.0]
|
| 86 |
|
|
1. Driver security support: Open/Shared WEP, WPA-PSK, WPA2-PSK, WPA-NONE.
|
| 87 |
|
|
2. Support 32/64-bit OS
|
| 88 |
|
|
3. Support A-MPDU and A-MSDU
|
